Electric Guitar nuts 1 34 wide 44mm Various configurations for

You can use dust or baking soda with glue, but I've found that a Q-Tip works very well too You simply tape off the ends of the nut and then

Electric Guitar nuts 1 34 wide 44mm Various configurations for Sand all 6 sides starting with 80 grit and finishing with 220 grit paper Mark the height of the fret wire to determine slot depth Mark the top edge of the nut

You can use dust or baking soda with glue, but I've found that a Q-Tip works very well too You simply tape off the ends of the nut and then

judi slot qq Your LP is actually closer to how nuts should be Ideally about half the diameter of the string should sit in the nut slot but since that's

Below: A 130″ file was used for the 5-string B, seen at left of nut Note that this is not filed to final depth; this will

guitar nut slot files Using the small wood block and a small hammer, gently tap the nut from the fingerboard side to loosen it from the slot Scrape away any remaining glue from the

I bought one of these nut height gauges a couple of years ago and it was one of my best tool investments You can use it to cut the slot depths