Holley 2245 Idle Circuit

It has very low vacuum at idle so I opened up the idle circuits a little This made the off idle transfer slots rich so I opened up the idle air

Holley 2245 Idle Circuit Holley, mild 502) that I am far far away from the proper idle transfer slot opening I've only got a 2 corner idle setup, but I've played with every

It has very low vacuum at idle so I opened up the idle circuits a little This made the off idle transfer slots rich so I opened up the idle air

find a slot machine This leaves the fuel to be adjusted by the primaries and the transfer slots The transfer slot should be a small square as mentioned If it is

With the Quick Fuel carburetor in place, we discovered that the transfer slot was uncovered by inch to create the desired idle speed But

holley transfer slot adjustment A good starting point for setting the secondary butterflies is to adjust the screw so that the transfer slot is visible on the intake manifold

I bet your idle adjust screws are about 12 a turn out 1 take the carb off and square up your idle transfer slot 3 Turn the idle mixture